
Calculate exact reconstitution volumes, insulin units, and doses per vial for any peptide.
Vial, water and dose are known
Units measure volume, not active substance. 2 IU = 0.02 ml. How many mg are in there depends on the mix. The calculator has worked that out for you.
Almost all insulin syringes are U-100. Only choose U-40 if the syringe is marked U-40.
CJC-1295 No DAC (without Drug Affinity Complex) is a synthetic analog of endogenous Growth Hormone-Releasing Hormone (GHRH). By binding to pituitary GHRH receptors, it stimulates natural, pulsatile growth hormone secretion. This guide covers everything you need to know: mechanism of action, dosing, reconstitution, storage, side effects, and how to combine it effectively with peptides like Ipamorelin.
Medical Disclaimer: The content on this page is for informational and educational purposes only. It does not constitute medical advice, diagnosis, or treatment. Peptides are not approved drugs for human use. Always consult a qualified healthcare provider before using peptides.
CJC-1295 No DAC — also called Modified GRF(1-29) or Mod GRF 1-29 — is a 29-amino-acid peptide derived from the first 29 residues of native GHRH. Four strategic amino acid substitutions (at positions 2, 8, 15, and 27) protect it from dipeptidyl peptidase IV (DPP-IV) enzymatic cleavage, increasing stability and receptor binding affinity compared to native GHRH while preserving the short, pulsatile pattern of GH release.
The key distinction from CJC-1295 with DAC is the absence of the Drug Affinity Complex. Without DAC, the peptide cannot covalently bind albumin in the bloodstream, resulting in a half-life of approximately 30 minutes rather than 6–8 days. This shorter half-life produces discrete GH pulses that more closely mirror the body's natural ultradian rhythm — a property many researchers consider more physiologically appropriate.
CJC-1295 No DAC binds to the GHRH receptor on somatotroph cells in the anterior pituitary. Receptor activation triggers intracellular cAMP signaling, leading to GH synthesis and release. The released GH then stimulates hepatic production of IGF-1 (Insulin-like Growth Factor 1), which mediates many of the downstream anabolic and lipolytic effects.
Potential effects mediated by increased GH and IGF-1 include:
Accurate dosage calculation is critical for both efficacy and safety. The standard dosing parameters for CJC-1295 No DAC are:
The standard BergdorfBio vial contains 10 mg of lyophilized CJC-1295 No DAC. Adding 2 ml of bacteriostatic water (BAC water) gives a concentration of:
10 mg ÷ 2 ml = 5 mg/ml = 5,000 mcg/ml
Using a standard U100 insulin syringe (100 units = 1 ml):
At 200 mcg twice daily, one 10 mg vial lasts 25 days. At 100 mcg once daily, the same vial lasts 100 days.
For precise volume calculations based on your vial size, reconstitution volume, and target dose, use the BergdorfBio Peptide Calculator. Enter your vial parameters and desired dose to get the exact volume to draw.
Start with a single 100 mcg injection in the evening, 30–60 minutes before sleep, on an empty stomach. This approach takes advantage of the natural nocturnal GH pulse and allows you to assess individual tolerance over the first 1–2 weeks before increasing frequency or dose.
The most widely used protocol consists of two daily injections:
Insulin strongly suppresses GH release, so timing injections away from meals — especially carbohydrate-rich meals — is essential. For those combining with Ipamorelin, both peptides can be drawn into the same syringe and injected together.
Experienced users may add a third injection at midday, fasted or at least 2 hours post-meal. Three daily injections provide more sustained IGF-1 elevation throughout the day but require stricter meal timing discipline.
Typical cycles run 8–12 weeks followed by a 4-week break. Some users report sustained benefits with longer 3–6 month cycles, though long-term human data remains limited. Cycle breaks help prevent desensitization of pituitary GHRH receptors.
CJC-1295 No DAC is supplied as a lyophilized (freeze-dried) powder and must be reconstituted before injection. You will need:
Use only bacteriostatic water or sterile water for injection. Do not use tap water, distilled water from consumer bottles, or saline solution not intended for injection.
CJC-1295 No DAC has a well-established tolerability profile when used at recommended doses. Known and potential side effects include:
Discontinue immediately and consult a physician if you experience persistent swelling, severe headache, visual disturbances, joint pain, or any other concerning symptoms. CJC-1295 No DAC is contraindicated in individuals with active malignancies, pituitary disorders, insulin resistance/diabetes (without medical supervision), or pregnancy.
The combination of CJC-1295 No DAC with Ipamorelin is the most widely studied and used GHRH/GHRP protocol. The synergy arises from complementary mechanisms: CJC-1295 activates the GHRH receptor, while Ipamorelin activates the ghrelin receptor (GHS-R1a). Simultaneous activation of both pathways produces a substantially larger GH pulse than either peptide alone.
Ipamorelin is particularly valued in this stack because it does not significantly raise cortisol or prolactin levels — a key advantage over older GHRPs like GHRP-2 or GHRP-6. The two peptides are fully compatible and can be mixed in the same syringe.
For individuals primarily targeting fat loss and body recomposition, AOD-9604 (a lipolytic GH fragment) can be added. AOD-9604 acts directly on adipocytes to promote fat breakdown without stimulating systemic GH or IGF-1 levels, making the combination complementary rather than redundant.
CJC-1295 with DAC contains a Drug Affinity Complex that enables covalent albumin binding, extending its half-life to 6–8 days. This allows for once-weekly injections but produces a sustained, blunted GH elevation rather than discrete pulses. CJC-1295 No DAC has a ~30-minute half-life and produces more physiological, pulsatile GH release. Most research protocols and practitioners favor the No DAC version for its more natural GH profile.
Yes. Both peptides are chemically compatible. Draw one peptide into the insulin syringe first, then add the second. Inject subcutaneously immediately after mixing. Do not store pre-mixed peptides.
The two most effective windows are: (1) morning, immediately upon waking before any food or carbohydrate intake; and (2) approximately 30–60 minutes before sleep. Both windows coincide with naturally low insulin levels, which maximize pituitary GH responsiveness. Avoid injecting within 2 hours of a carbohydrate-heavy meal.
Most users notice improved sleep quality and faster exercise recovery within 3–4 weeks. Observable changes in body composition — increased muscle definition, reduced subcutaneous fat — typically emerge after 8–12 weeks. This timeline reflects the gradual rise and sustained elevation of IGF-1 required for tissue-level changes.
Unlike synthetic GH administration, CJC-1295 No DAC works by amplifying the pituitary's existing capacity to produce and release GH — it does not introduce exogenous GH. Most research suggests that properly cycled GHRH analogs do not suppress the hypothalamic-pituitary axis, though prolonged continuous use theoretically risks receptor desensitization. Cycling is recommended as a precaution.
It is strongly recommended to establish baseline IGF-1 levels and rule out contraindications before starting any GHRH analog. A physician can also monitor IGF-1 during a cycle to ensure levels remain in a safe, physiological range. Elevated IGF-1 beyond normal ranges is associated with adverse health risks.
BergdorfBio offers research-grade CJC-1295 No DAC with verified purity. Each vial is tested for identity and concentration. Visit the CJC-1295 No DAC product page for current availability and pricing.
The legal status of CJC-1295 No DAC varies by jurisdiction. In most countries it is not approved for human pharmaceutical use and is classified as a research chemical. It is prohibited in competitive sports under WADA regulations. Always verify the regulations applicable in your country before purchasing or using this peptide.
Disclaimer: This content is for informational and research purposes only. CJC-1295 No DAC is not an approved drug for human therapeutic use. The applications described have not been evaluated or approved by the FDA, EMA, or any other regulatory authority. Do not use peptides without the supervision of a qualified medical professional.
From powder to a ready syringe in five steps. The calculator above gives you the amounts automatically.
Bring vial and water to room temperature. Wipe both rubber stoppers with an alcohol swab.
Draw up the amount of BAC water recommended by the calculator using a larger syringe.
Let the water run down the inside wall of the peptide vial, do not spray it directly onto the powder.
Roll the vial gently, do not shake. The powder dissolves clear within 1-2 minutes.
Draw up to exactly the calculated mark with the insulin syringe. Done.
Typical starting values for orientation. Each row opens the calculator for that peptide.
| Peptide | Category | Typical dose | Vial sizes | BAC (start) | Available | Calculate |
|---|---|---|---|---|---|---|
| Retatrutide | GLP-1/GIP/GCG | 0,5-12 mg | 2 / 5 / 10 / 15 mg | 2 ml | Calculator only | Calculate |
| Semaglutide | GLP-1 | 0,25-2,4 mg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Tirzepatide | GLP-1/GIP | 2,5-15 mg | 5 / 10 / 15 mg | 2 ml | Calculator only | Calculate |
| GHK-Cu | Copper Peptide | 1-4 mg | 10 / 20 / 50 mg | 5 ml | Calculator only | Calculate |
| BPC-157 | Tissue Repair | 200-500 mcg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| TB-500 | Thymosin Beta-4 | 2-5 mg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| CJC-1295 (no DAC) | GHRH Analog | 100-200 mcg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Ipamorelin | GHRP | 200-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| AOD-9604 | Fat Loss | 250-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| PT-141 | Bremelanotide | 0,5-2 mg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| MOTS-c | Mitochondrial | 5-10 mg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Selank | Anxiolytic | 150-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| SS-31 | Elamipretide | 0,1-1 mg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Glow Stack | Stack | 0,5-2 mg | 70 mg | 3 ml | Calculator only | Calculate |
| Klow Stack | Stack | 0,5-2 mg | 55 mg | 3 ml | Calculator only | Calculate |
| Melanotan II | Melanocortin | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Melanotan I | Melanocortin | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Sermorelin | GHRH Analog | 50-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| Tesamorelin | GHRH Analog | 1-2 mg | 10 / 20 mg | 2 ml | Calculator only | Calculate |
| Thymosin Alpha-1 | Thymic Peptide | 0,8-3,2 mg | 1.6 / 5 / 10 mg | 1 ml | Calculator only | Calculate |
| Epithalon | Longevity | 2-10 mg | 10 / 20 / 50 mg | 2 ml | Calculator only | Calculate |
| KPV | Immune / Barrier | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| HGH Fragment 176-191 | Metabolic Fragment | 100-500 mcg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Semax | Cognitive | 100-1000 mcg | 10 / 30 mg | 2 ml | Calculator only | Calculate |
| N-Acetyl Semax | Cognitive | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Hexarelin | GHRP | 50-200 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| GHRP-6 | GHRP | 50-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| GHRP-2 | GHRP | 50-250 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| DSIP | Sleep | 50-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| 5-Amino-1MQ | Metabolic | 2,5-10 mg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| HGH 191AA | Growth Hormone | 1-5 mg | 10 mg | 1 ml | Calculator only | Calculate |
| NAD+ | Longevity / Cofactor | 100-500 mg | 1000 mg | 10 ml | Calculator only | Calculate |
Values are for orientation in a research context and do not replace professional advice.
Calculating concentration and injection volume correctly seems trivial, but it is the most common source of error. Even a 10 % miscalculation during reconstitution means you either get too little active substance or unintentionally overdose.
Lyophilized peptides are supplied in milligrams and dissolved in bacteriostatic water (BAC water). The ratio of peptide to water determines the concentration, and from that follows how many units you draw up on the insulin syringe. Insulin syringes are scaled in units, not milligrams. The calculator handles this conversion, including the plausibility check against the most dangerous error: confusing mg and mcg.
Milligrams (mg) is the unit lyophilized peptides are sold in, for example “5 mg BPC-157”. Micrograms (mcg) measure the single dose, for example “250 mcg per injection”. 1 mg = 1,000 mcg. The calculator converts automatically and warns when an entry looks like a mix-up.
U-100 means the syringe is calibrated for 100 units per milliliter. 100 IU = 1 ml, so 10 IU = 0.10 ml, regardless of what is in the syringe. The IU calculation is based on exactly this relationship.
With a lot of peptide and little water the solution becomes very concentrated, so the volume per dose is tiny and hard to read. Use the mixing helper: it finds the water volume that produces a clean, easily readable mark.
In the fridge at 2-8 °C usually 21-30 days. Label the vial with the reconstitution date. Cloudy solutions or particles are a no-go.
Blends contain several active substances in one vial. Just select the blend as your peptide: the calculator additionally shows how much of each component is in your injection. For combinations of several separate vials, use the Stack Builder.
No. Your last settings are stored locally in the browser and restored on your next visit. You can also recall calculations from the history, save them as a protocol or share them as a link.
Choose a peptide to open its dedicated calculator page with pre-filled values.
View Product
CJC-1295 (no DAC)Vial, water and dose are known
Units measure volume, not active substance. 2 IU = 0.02 ml. How many mg are in there depends on the mix. The calculator has worked that out for you.
Almost all insulin syringes are U-100. Only choose U-40 if the syringe is marked U-40.
Typical starting values for orientation. Each row opens the calculator for that peptide.
| Peptide | Category | Typical dose | Vial sizes | BAC (start) | Available | Calculate |
|---|---|---|---|---|---|---|
| Retatrutide | GLP-1/GIP/GCG | 0,5-12 mg | 2 / 5 / 10 / 15 mg | 2 ml | In stock | Calculate |
| Tirzepatide | GLP-1/GIP | 2,5-15 mg | 5 / 10 / 15 mg | 2 ml | In stock | Calculate |
| GHK-Cu | Copper Peptide | 1-4 mg | 10 / 20 / 50 mg | 5 ml | In stock | Calculate |
| BPC-157 | Tissue Repair | 200-500 mcg | 2 / 5 / 10 mg | 2 ml | In stock | Calculate |
| TB-500 | Thymosin Beta-4 | 2-5 mg | 2 / 5 / 10 mg | 2 ml | In stock | Calculate |
| CJC-1295 (no DAC) | GHRH Analog | 100-200 mcg | 2 / 5 / 10 mg | 2 ml | In stock | Calculate |
| MOTS-c | Mitochondrial | 5-10 mg | 5 / 10 mg | 2 ml | In stock | Calculate |
| Klow Stack | Stack | 0,5-2 mg | 55 mg | 3 ml | In stock | Calculate |
| Melanotan II | Melanocortin | 100-1000 mcg | 5 / 10 mg | 2 ml | In stock | Calculate |
| Tesamorelin | GHRH Analog | 1-2 mg | 10 / 20 mg | 2 ml | In stock | Calculate |
| Thymosin Alpha-1 | Thymic Peptide | 0,8-3,2 mg | 1.6 / 5 / 10 mg | 1 ml | In stock | Calculate |
| KPV | Immune / Barrier | 100-1000 mcg | 5 / 10 mg | 2 ml | In stock | Calculate |
| Semax | Cognitive | 100-1000 mcg | 10 / 30 mg | 2 ml | In stock | Calculate |
| NAD+ | Longevity / Cofactor | 100-500 mg | 1000 mg | 10 ml | In stock | Calculate |
| Semaglutide | GLP-1 | 0,25-2,4 mg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Ipamorelin | GHRP | 200-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| AOD-9604 | Fat Loss | 250-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| PT-141 | Bremelanotide | 0,5-2 mg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Selank | Anxiolytic | 150-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| SS-31 | Elamipretide | 0,1-1 mg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Glow Stack | Stack | 0,5-2 mg | 70 mg | 3 ml | Calculator only | Calculate |
| Melanotan I | Melanocortin | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Sermorelin | GHRH Analog | 50-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| Epithalon | Longevity | 2-10 mg | 10 / 20 / 50 mg | 2 ml | Calculator only | Calculate |
| HGH Fragment 176-191 | Metabolic Fragment | 100-500 mcg | 2 / 5 / 10 mg | 2 ml | Calculator only | Calculate |
| N-Acetyl Semax | Cognitive | 100-1000 mcg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| Hexarelin | GHRP | 50-200 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| GHRP-6 | GHRP | 50-300 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| GHRP-2 | GHRP | 50-250 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| DSIP | Sleep | 50-500 mcg | 2 / 5 mg | 2 ml | Calculator only | Calculate |
| 5-Amino-1MQ | Metabolic | 2,5-10 mg | 5 / 10 mg | 2 ml | Calculator only | Calculate |
| HGH 191AA | Growth Hormone | 1-5 mg | 10 mg | 1 ml | Calculator only | Calculate |
Values are for orientation in a research context and do not replace professional advice.
Choose a peptide to open its dedicated calculator page with pre-filled values.